Kenmore Dishwasher Model 665 Troubleshooting: Expert Tips

The Kenmore Dishwasher Model 665 may experience issues like not starting, not draining, or leaving dishes dirty. Check power connections, filters, and spray arms first.

Kenmore Dishwasher Model 665 is a reliable household appliance, but like any machine, it can encounter problems. Common issues include the dishwasher not starting, not draining properly, or failing to clean dishes effectively. Addressing these problems promptly ensures your dishwasher runs smoothly and efficiently.

Begin troubleshooting by checking the power connections and ensuring that the door is latched correctly. Inspect the filters and spray arms for any blockages or debris. Routine maintenance and a few simple checks can often resolve most issues, saving you time and the expense of professional repairs.

Kenmore Dishwasher Model 665 Troubleshooting

Credit: www.flickr.com

Common Issues

Kenmore Dishwasher Model 665 is popular. It can have common issues. Knowing these helps you fix them. Below are two main problems.

No Power

A common problem is no power. The dishwasher won’t start. Check these steps:

Power Supply: Ensure the dishwasher is plugged in.
Circuit Breaker: Check if the circuit breaker is tripped.
Door Latch: Confirm the door is closed properly.

Control Lock: See if the control lock is on.

Water Leakage

Water leakage is another issue. This can cause damage. Here’s how to check:

Door Seal: Inspect the door seal for cracks or wear.

Hoses: Look for leaks in the hoses.
Float Switch: Ensure the float switch is not stuck.
Detergent Usage: Use the correct amount of detergent.

Issue	Possible Cause	Solution
No Power	Unplugged, Tripped Breaker	Plug in, Reset Breaker
Water Leakage	Worn Seal, Leaky Hose	Replace Seal, Fix Hose

These steps can help you fix common issues. This ensures your dishwasher runs well.

Error Codes

The Kenmore Dishwasher Model 665 can display various error codes. These error codes help identify issues quickly. Knowing what each code means can save time. Below are two common error codes you might encounter.

E1

The E1 error code typically signals a water heating issue. This means the water is not heating up properly. To fix this, follow these steps:

Check if the water heater is functioning.
Inspect the heating element for any damage.
Ensure the temperature sensor is working.

If the problem persists, it might be a control board issue. Contact a professional for further assistance.

E2

The E2 error code indicates a drainage problem. This means the dishwasher is having trouble draining water. To troubleshoot this, perform the following checks:

Ensure the drain hose is not blocked.

Check the drain pump for any obstructions.
Inspect the filter and clean it if necessary.

In some cases, the drain pump may need replacement. If unsure, seek help from a qualified technician.

Cleaning Tips

Keeping your Kenmore Dishwasher Model 665 clean ensures it works well. Regular maintenance helps avoid costly repairs. Below are some cleaning tips.

Filter Maintenance

The filter catches food particles and debris. Clean it regularly to avoid clogs.

Remove the bottom rack to access the filter.

Twist and lift the filter out.
Rinse under warm water.
Use a soft brush to remove stubborn debris.

Reinstall the filter by twisting it back in place.

Spray Arms

Spray arms help distribute water evenly. Keep them clean for better performance.

Remove the spray arms by unscrewing them.

Rinse them under warm water.
Use a toothpick to clear clogged holes.
Reattach the spray arms securely.

Maintain your dishwasher with these simple steps. Enjoy clean dishes every time!

Water Supply Problems

Experiencing water supply problems with your Kenmore Dishwasher Model 665? These issues can disrupt your dishwashing routine. Let’s explore two common causes: low pressure and a blocked inlet.

Low Pressure

Low water pressure can significantly impact your dishwasher’s performance. Here are some potential reasons:

Check if the water supply valve is fully open.
Inspect the water hose for kinks or bends.
Verify the home water pressure is adequate. It should be between 20 and 120 PSI.

Proper water pressure ensures efficient cleaning. Always address low pressure promptly.

Blocked Inlet

A blocked inlet can stop water from entering the dishwasher. Here’s how to troubleshoot:

Turn off the water supply.

Disconnect the water inlet hose.
Inspect the inlet screen for debris or sediment.
Clean the inlet screen using a small brush.

Reconnect the hose and turn on the water supply.

A clean inlet screen allows water to flow freely. Regular maintenance prevents blockages.

Drainage Issues

Is your Kenmore Dishwasher Model 665 not draining properly? Drainage issues are common. They can be frustrating. Let’s explore some common causes and solutions.

Clogged Hose

A clogged hose often stops the dishwasher from draining. Over time, food particles and debris can build up. This prevents water from flowing freely.

To check for a clogged hose:

Turn off the power to the dishwasher.

Locate the drainage hose at the back.
Detach the hose carefully.
Inspect the hose for clogs.

Clean the hose with a long brush.
Reattach the hose securely.

Pump Malfunction

A pump malfunction can also cause drainage issues. The pump moves water out of the dishwasher. If the pump fails, water will not drain.

To troubleshoot the pump:

Ensure the dishwasher is off.
Access the pump by removing the bottom panel.

Check for any visible damage or blockages.
Use a multimeter to test the pump’s electrical continuity.
If faulty, consider replacing the pump.

If you find the pump is damaged, replace it. This will help restore proper drainage.

Issue	Solution
Clogged Hose	Clean the hose thoroughly.
Pump Malfunction	Inspect and replace if needed.

Addressing these common issues can help ensure your dishwasher drains properly. Keep your Kenmore Dishwasher Model 665 running smoothly.

Detergent Dispenser

Dealing with a malfunctioning detergent dispenser in your Kenmore Dishwasher Model 665 can be frustrating. This critical component ensures that detergent releases at the right time. Without it, your dishes won’t get clean. Let’s dive into some common issues and their solutions.

Not Opening

If your detergent dispenser isn’t opening, your dishes won’t get clean. Here are some possible reasons:

Broken spring: The spring might be broken or dislodged.
Blocked latch: Food particles can block the latch mechanism.

Faulty timer: The timer may not signal the dispenser to open.

To fix this, check the latch for debris. Clean it with a soft brush. If the spring is broken, you might need a replacement. Ensure the timer is functioning correctly.

Residue Left

If there’s residue left in the dispenser, it could mean improper cleaning. Here are some reasons:

Clogged dispenser: Detergent can clog the dispenser over time.
Low water temperature: Cold water might not dissolve the detergent.
Overloaded dishwasher: Too many dishes can block water flow.

To resolve this, clean the dispenser regularly. Make sure your water heater is set to the right temperature. Avoid overloading your dishwasher. Place dishes correctly to ensure water reaches the dispenser.

Here’s a quick troubleshooting table for easy reference:

Issue	Possible Cause	Solution
Not Opening	Broken spring, Blocked latch, Faulty timer	Check and clean latch, Replace spring, Inspect timer
Residue Left	Clogged dispenser, Low water temperature, Overloaded dishwasher	Clean dispenser, Adjust water heater, Avoid overloading

Door Seal Problems

Kenmore Dishwasher Model 665 is a reliable appliance. Yet, door seal problems can cause leaks and inefficiency. Understanding these issues can help you troubleshoot effectively. Below, we explore common door seal problems and how to fix them.

Seal Replacement

The door seal in your Kenmore Dishwasher Model 665 can wear out. A worn-out seal can cause leaks. To fix this, you need to replace the seal. Follow these steps:

Turn off the dishwasher and unplug it.
Open the dishwasher door fully.

Locate the old seal around the door.
Gently pull out the old seal.
Clean the groove where the seal sits.

Take the new seal and press it into the groove.
Ensure the seal is snug and even.
Close the door and test for leaks.

Tip: Always use a genuine Kenmore replacement seal for the best fit.

Misalignment

Sometimes, the door seal is not the issue. The door itself may be misaligned. This can cause the seal to not function properly. Here’s how to check and fix misalignment:

Open the dishwasher door.

Inspect the door hinges and latch.
If the door is not level, adjust the hinges.
Tighten any loose screws on the hinges.

Check if the latch closes properly.
Adjust the latch if needed.

Note: A properly aligned door ensures the seal works correctly.

By addressing these door seal problems, you can extend the life of your Kenmore Dishwasher Model 665. Regular maintenance can prevent leaks and improve efficiency.

Rack Adjustments

Adjusting the racks in your Kenmore Dishwasher Model 665 can improve cleaning. Make sure your dishes are arranged properly. This guide will show you how to adjust both the upper and lower racks.

Upper Rack

The upper rack is perfect for small dishes, cups, and glasses. To adjust the upper rack:

Locate the side levers on both sides of the rack.
Lift the levers to release the rack.
Raise or lower the rack to your desired height.

Release the levers to lock the rack in place.

This adjustment helps fit larger items in the lower rack. Also, it ensures better water circulation.

Lower Rack

The lower rack holds larger items like pots, pans, and plates. Adjusting the lower rack is easy:

Pull the rack out to its full extension.
Locate the adjustable tines on the rack.
Move the tines to fit your larger items.

Push the rack back in and check for stability.

Proper adjustment of the lower rack ensures your larger items get cleaned effectively. It also helps avoid blocking the spray arms.

Rack	Items	Adjustment Steps
Upper Rack	Small dishes, cups, glasses	Lift levers Adjust height Lock in place
Lower Rack	Pots, pans, plates	Extend rack Adjust tines Push back in

By following these steps, you can ensure your Kenmore Dishwasher Model 665 performs at its best. Proper rack adjustments can lead to cleaner dishes and better dishwasher performance.

Frequently Asked Questions

How Do You Reset A Kenmore Dishwasher Model 665?

To reset a Kenmore dishwasher model 665, press the “Heated Dry” and “Normal Wash” buttons alternatively. Repeat this sequence twice.

Why Is My Kenmore Dishwasher Not Starting Cycle?

Your Kenmore dishwasher might not start due to a faulty door latch, blown fuse, or malfunctioning control panel. Check power supply and ensure the door is securely closed.

How Do I Clean The Filter On My Kenmore Dishwasher Model 665?

To clean the filter on your Kenmore dishwasher model 665, remove the lower rack. Twist the filter counterclockwise and lift it out. Rinse under warm water, scrubbing gently. Reinstall by aligning and twisting clockwise.

How Do I Put My Kenmore Dishwasher In Diagnostic Mode?

To enter diagnostic mode on a Kenmore dishwasher, press “Heated Dry” and “Normal Wash” alternately. Repeat this sequence twice.

Why Is My Kenmore Dishwasher Not Starting?

Check the door latch, power supply, and control panel for any issues.

Conclusion

Troubleshooting your Kenmore Dishwasher Model 665 can be simple with the right steps. Regular maintenance prevents most issues. Follow the guide to fix common problems easily. This ensures your dishwasher runs efficiently and lasts longer. Always consult the manual for specific concerns.

Keep your appliance in top shape with these tips.