To troubleshoot the Pentair Prowler 920, simply press the Weekly Timer button four consecutive times to reset the cleaner’s schedule. If your automatic pool vacuum is not moving, it may be due to suction problems caused by a blockage or air in the vacuum hose.
Ensure that the water level in your pool is high enough to cover the weir and return jets. Additionally, check the power cord and power supply to ensure proper connection and functionality. If your Polaris pool cleaner keeps stopping, check for any disconnected water tubes that may reduce internal pressure.
For more detailed troubleshooting, refer to the manual or consult a pool professional.
Contents
Check The Water Level
If your Pentair Prowler 920 automatic pool cleaner is not moving, one of the first things you should check is the water level in your pool. The water level plays a crucial role in the proper functioning of the cleaner. Insufficient water levels can cause suction issues and prevent the cleaner from moving effectively.
Ensure The Water Level In The Pool Covers The Weir And Return Jets
It is important to ensure that the water level in your pool is high enough to cover the weir and return jets. The weir is the floating door located at the skimmer, while the return jets are the outlets that circulate the filtered water back into the pool. Check that the water level is at an adequate height so that these components are fully submerged.
Inadequate water levels can lead to suction problems, inhibiting the cleaner’s movement. Without a proper water level, the cleaner may struggle to generate the necessary suction power to effectively clean the pool.
To check the water level, visually inspect the skimmer and return jets. If you notice that the water does not cover these components, it’s time to adjust the water level. Add water to the pool until the weir and return jets are completely submerged.
This simple step can make a significant difference in the performance of your Pentair Prowler 920 pool cleaner. By ensuring the water level covers the weir and return jets, you can eliminate suction issues and allow the cleaner to move freely, delivering a thorough cleaning experience.
Ensure Proper Power Supply
One of the most common issues with the Pentair Prowler 920 pool cleaner is a lack of power supply. Without a proper power source, the cleaner will not be able to function effectively. To troubleshoot this issue, there are a few simple steps you can take.
Check If The Power Cord Is Plugged In Securely
The first thing you should do is check if the power cord of your Pentair Prowler 920 is securely plugged in. Sometimes, the cord may come loose or disconnect, preventing the cleaner from receiving power. Make sure the cord is firmly connected to both the outlet and the cleaner itself. If it appears to be loose, unplug it and plug it back in, ensuring a secure connection.
Verify That The Power Supply Indicator Light Is On
Next, check the power supply indicator light on the cleaner. This light indicates whether the cleaner is receiving power or not. If the light is off, it may indicate a power supply issue. In this case, check the outlet and ensure it is functioning properly. You may also want to try plugging another device into the same outlet to verify if it is working as intended.
If the power supply indicator light is still not turning on, you may need to consider checking the circuit breaker or contacting a professional technician to inspect the electrical connections.
If The Pool Cleaner Is Still Not Moving, There May Be An Issue With The Cleaner Itself
If the power cord is securely plugged in and the power supply indicator light is on, but the Pentair Prowler 920 is still not moving, there may be an issue with the cleaner itself. In this case, refer to the user manual or contact Pentair customer support for further troubleshooting steps or to schedule a repair.
It is important to ensure a proper power supply for your Pentair Prowler 920 pool cleaner to ensure optimal performance. By checking the power cord and the power supply indicator light, you can quickly identify and resolve any power-related issues that may be hindering the cleaner’s movement. If the issue persists, however, it may be best to seek professional assistance to diagnose and fix the problem with the cleaner itself.
Clear Blockages
Inspect The Vacuum Hose For Any Blockages Or Obstructions
One common issue that can prevent the Pentair Prowler 920 from functioning properly is a blocked or obstructed vacuum hose. If the cleaner is not moving or is moving sluggishly, it’s important to check the hose for any debris or foreign objects that may be clogging it.
Remove Any Debris Or Foreign Objects That May Impede The Cleaner’s Movement
To clear any blockages in the vacuum hose, start by removing the cleaner from the pool and turning it off. Carefully inspect the entire length of the hose for any obstructions. This can include leaves, twigs, or even small toys that may have been sucked up.
If you spot any debris, remove it by carefully dislodging it with your fingers or using a long, flexible object such as a pipe cleaner or a plumbing snake. Take care not to damage the hose while doing this.
Once you have cleared the hose, take a moment to inspect the cleaner itself. Look for any debris or objects that may be stuck in the wheels or brushes. Use a soft brush or cloth to remove any dirt or grime that may be hindering the cleaner’s movement.
After you have cleaned the hose and the cleaner, reconnect the vacuum hose to the cleaner and place it back in the pool. Turn the cleaner on and observe its movement to ensure that it is now operating correctly.
Regularly checking for blockages and removing any obstructions is important for the proper functioning of your Pentair Prowler 920. By keeping the vacuum hose and cleaners free from debris, you can ensure that they operate efficiently and keep your pool clean and sparkling.
Check Internal Tubing
One common issue that can cause the Pentair Prowler 920 pool cleaner to stop moving is disconnected internal tubing. The internal tubing plays a crucial role in directing pressure throughout the cleaning unit, ensuring efficient movement and cleaning. When these tubes become disconnected, it reduces the internal pressure, causing the cleaner to come to a halt.
To troubleshoot this issue, it’s essential to open up the pool cleaner and check that all internal tubing is securely connected. Here are the steps to follow:
- Turn off the pool cleaner and unplug it from the power supply.
- Remove the cleaner’s housing to gain access to the internal components.
- Inspect each tubing connection and ensure they are properly secured.
- If any tubing is disconnected, carefully reconnect it according to the manufacturer’s instructions.
- Once all tubing connections have been checked and secured, reassemble the cleaner’s housing.
- Plug the cleaner back into the power supply and observe if it resumes proper movement.
By verifying and fixing any disconnected internal tubing, you can restore the Pentair Prowler 920’s functionality and ensure it continues to clean your pool effectively.
Reset The Cleaner’s Schedule
One common issue that pool owners may encounter with the Pentair Prowler 920 is scheduling problems. Fortunately, resetting the cleaner’s schedule is a simple solution that can resolve any issues and get the cleaner back on track.
Press The Weekly Timer Button Four Consecutive Times To Reset The Cleaner’s Schedule
If you are experiencing scheduling issues with your Pentair Prowler 920, you can easily reset the cleaner’s schedule in just a few steps. To do this, locate the Weekly Timer button on the cleaner’s control panel. The Weekly Timer button is designed with a clock symbol for easy identification.
Once you have located the Weekly Timer button, press it four consecutive times. This action will reset the cleaner’s schedule and clear any previous settings or programming errors that may have been causing the scheduling issues.
By performing this simple reset, you can ensure that your Pentair Prowler 920 is back on track and ready to efficiently clean your pool on the desired schedule.
Frequently Asked Questions
How Do You Reset A Pentair Prowler 920?
To reset a Pentair Prowler 920, simply press the Weekly Timer button four consecutive times.
Why is my automatic pool vacuum not moving?
The automatic pool vacuum may not be moving due to suction problems caused by blockage or air in the vacuum hose. Make sure the water level in the pool covers the weir and return jets. Check the power cord and power supply if it’s a robotic pool cleaner.
For a Polaris pool cleaner, check for disconnected water tubes.
Why is my pool robot not working?
If your pool robot is not working, check the power cord and make sure it’s properly plugged in. Also, check the power supply and make sure the indicator light is on. If the pool cleaner is still not moving, there may be a problem with the cleaner itself.
Why Does My Polaris Pool Cleaner Keep Stopping?
A Polaris pool cleaner may keep stopping if the water tubes inside become disconnected, reducing internal pressure. Check and ensure all internal tubing is connected properly.
Why is my Pentair Prowler 920 not moving?
The automatic pool vacuum may have a suction problem caused by a blockage or air in the vacuum hose. Ensure the proper water level and check for any obstructions.
Conclusion
To ensure your Pentair Prowler 920 operates smoothly, it’s important to troubleshoot any issues that may arise. Start by checking the power cord and ensuring it’s properly plugged in. Additionally, verify that the water level in your pool is sufficient to cover the weir and return jets to avoid suction problems.
If your robotic pool cleaner is still not moving, inspect the internal tubing of the Polaris cleaner to ensure it’s connected correctly. By following these troubleshooting steps, you can keep your pool looking clean and pristine.
