Revolv Furnace Troubleshooting: Quick Fixes for Warmth

Revolv furnace troubleshooting involves checking the igniter, flame sensor, draft inducer motor, control board, flame rollout switch, gas valve, and pressure switch. When a Revolv furnace doesn’t produce heat, it may be due to a fuel supply or ignition system issue.

Additionally, ensure the thermostat has power and check the furnace filter, thermostat settings, electrical panel, flame, pilot light, gas valve, and front panel for proper functioning. If the pilot light is on and the blower is running, but the burner does not ignite, it may indicate a problem with the furnace.

It is essential to follow these troubleshooting steps before seeking professional help.

Revolv Furnace Troubleshooting: Quick Fixes for Warmth


Introduction To Revolv Furnace Issues

Experiencing issues with your Revolv furnace? Common problems include the furnace not heating, trouble with the fuel supply or ignition system, and issues with the thermostat or power source. Troubleshoot by checking the thermostat, furnace filter, and electrical panel before seeking professional assistance.

Common Symptoms Of Malfunction

Revolv furnace is one of the most reliable heating systems out there. However, like any other heating system, it may face certain issues over time. One of the most common symptoms of a malfunctioning Revolv furnace is inadequate heating. If your furnace is not providing enough heat or not heating at all, it may be due to a clogged air filter, a malfunctioning thermostat, or a faulty igniter. Additionally, if you notice unusual noises coming from your furnace, it could be due to loose parts or a damaged blower motor.

Importance Of Timely Troubleshooting

Inadequate heating or unusual noises from your furnace are signs that you need to troubleshoot your Revolv furnace immediately. Delaying furnace troubleshooting can lead to more serious issues, such as carbon monoxide leaks or complete furnace breakdown. Timely troubleshooting can help you avoid costly repairs and ensure that your furnace runs efficiently throughout its lifespan.

Steps For Troubleshooting Revolv Furnace Issues

To troubleshoot your Revolv furnace issues, you can follow these simple steps:
  1. Check the air filter and replace it if it’s dirty or clogged.
  2. Inspect the thermostat and ensure it’s set to the correct temperature.
  3. Check the circuit breaker and ensure that it’s not tripped.
  4. Inspect the furnace’s ignition system, including the igniter and flame sensor.
  5. Examine the blower motor and ensure it’s not damaged or worn out.
  6. Inspect the gas valve and ensure that it’s not clogged or stuck.
  7. Check the pressure switch and ensure it’s not damaged or malfunctioning.
By following these steps, you can troubleshoot your Revolv furnace issues and ensure that it’s running efficiently. However, if you’re not confident in your troubleshooting skills, it’s best to call a professional HVAC technician to diagnose and fix the issue.
Revolv Furnace Troubleshooting: Quick Fixes for Warmth


Initial Checks For Quick Fixes

When dealing with furnace issues, it’s essential to start with some initial checks to troubleshoot and possibly resolve the problem quickly. By conducting these preliminary assessments, you can potentially identify simple fixes before delving into more complex troubleshooting processes.

Assessing The Power Source And Batteries

  • Check if the thermostat has working batteries.
  • Ensure there is power reaching the furnace.

Inspecting The Thermostat For Issues

  1. Verify that the thermostat is set to the correct temperature.
  2. Check if the thermostat display is functioning properly.

Understanding The Furnace’s Reset Button

When your furnace malfunctions, the reset button can be a lifesaver, but understanding its role and location is crucial. Here’s an overview to help you troubleshoot your Revolv furnace effectively.

Locating The Reset Button

The reset button on your Revolv furnace is typically situated on the blower motor and is often painted red or yellow for easy identification. When tripped, it will protrude about a half-inch, making it distinguishable from its flush position.

Functions Of The Reset Button

The reset button serves as a safety feature, designed to protect the furnace from potential damage. When the furnace experiences an issue such as overheating or a power surge, the reset button pops out, interrupting the furnace’s operation and preventing further damage.

Fuel And Ignition System Checks

When it comes to troubleshooting your Revolv furnace, it’s essential to thoroughly examine the fuel and ignition systems. Ensuring the proper supply of fuel and diagnosing any issues with the ignition system can help identify and resolve common furnace problems. Let’s dive into the key steps for conducting fuel and ignition system checks to keep your furnace running efficiently.

Ensuring Proper Fuel Supply

One of the primary steps in furnace troubleshooting is to ensure that the fuel supply is uninterrupted and reaching the furnace without any obstructions. Here are some essential checks to perform:

  • Verify that the fuel source, whether it’s natural gas or propane, is readily available and connected to the furnace.
  • Inspect the fuel lines for any leaks, blockages, or damage that may impede the flow of fuel to the furnace.
  • Check the fuel valve to ensure it is open and functioning correctly, allowing the fuel to reach the ignition system.
  • Examine the fuel filter for any clogs or debris that could hinder the proper flow of fuel to the burner.

Troubleshooting The Ignition System

The ignition system is crucial for initiating the combustion process and generating heat within the furnace. Here’s a systematic approach to troubleshooting the ignition system:

  1. Inspect the igniter for signs of wear, damage, or malfunction. A faulty igniter can prevent the furnace from lighting up.
  2. Check the flame sensor to ensure it is clean and positioned correctly. A dirty or misaligned flame sensor can disrupt the ignition sequence.
  3. Examine the draft inducer motor for proper operation, as it plays a key role in creating the necessary airflow for combustion.
  4. Verify the functionality of the control board, as any failures in this component can lead to ignition issues.
  5. Inspect the flame rollout switch for any tripped conditions, which may indicate overheating or other safety concerns.
  6. Test the gas valve to ensure it is opening and supplying fuel to the burner as required for ignition.
  7. Check the pressure switch for proper activation, as it ensures the presence of adequate airflow for safe ignition and operation.

By conducting thorough checks on the fuel supply and ignition system, you can effectively troubleshoot and address common issues that may affect the performance of your Revolv furnace.

Air Flow And Filter Considerations

When it comes to troubleshooting your Revolv furnace, it’s crucial to pay attention to air flow and filter considerations. Proper air flow and a clean filter are essential for the efficient operation of your furnace. Let’s explore some key steps to consider when examining the air flow and filter issues.

Examining The Furnace Filter

1. Check for visible dirt and debris on the filter.

2. Ensure the filter is the correct size and properly installed.

3. Replace the filter if it appears clogged or dirty.

4. Regularly change the filter according to the manufacturer’s recommendations.

Checking The Blower Motor And Air Flow

1. Inspect the blower motor for any signs of malfunction or unusual noise.

2. Verify that the air vents and registers are not blocked or obstructed.

3. Clean the air ducts to remove any potential obstructions.

4. Ensure that there is consistent and strong air flow from the vents.

Electrical Components And Safety Switches

When it comes to troubleshooting your Revolv furnace, understanding the electrical components and safety switches is crucial. A malfunction in these areas can lead to heating issues and potential safety hazards. In this section, we will explore the steps to inspect the furnace switch and electrical panel, as well as verify the flame rollout switch.

Inspecting The Furnace Switch And Electrical Panel

Start by checking the furnace switch to ensure it is in the “on” position. Verify that the electrical panel supplying power to the furnace is not tripped or experiencing any issues. Inspect the wiring for any signs of damage or loose connections.

Verifying The Flame Rollout Switch

The flame rollout switch is a crucial safety component that detects if the flames from the burner are not properly contained within the combustion chamber. To verify its functionality, carefully examine the switch for any signs of discoloration, indicating a previous activation. Additionally, test the switch to ensure it is responsive and able to interrupt the furnace’s operation in the event of a flame rollout.

Pilot Light And Gas Valve Operations

Understanding the pilot light and gas valve operations is crucial for effective Revolv furnace troubleshooting. The pilot light and gas valve are key components that ensure proper heating functionality.

Addressing Pilot Light Issues

If the pilot light is out, it can lead to heating problems. Check for any blockages or debris obstructing the pilot light. Ensure the pilot light flame is steady and blue. If the flame is weak or yellow, it may indicate an issue that needs attention.

Assessing The Gas Valve Functionality

The gas valve controls the flow of gas to the furnace. Make sure the gas valve is open and supplying gas to the furnace. Check for any leaks or malfunctions that could affect the heating process. Test the gas valve for proper operation to ensure it is functioning correctly.

Advanced Troubleshooting Techniques

When troubleshooting a Revolv furnace, check the igniter, flame sensor, draft inducer motor, control board, flame rollout switch, gas valve, and pressure switch. Ensure power source and thermostat are functioning properly. Verify fuel supply and ignition system if the furnace is on but not producing heat.

Always secure the front panel and check the pilot light.

Investigating Control Board Failure

One of the most common issues with a Revolv furnace is control board failure. If your furnace is not working, the control board could be the problem. You can investigate this issue by checking the control board for any visible damage or burn marks. If you find any, replace the control board. If you don’t see any visible damage, you can use a multimeter to test the control board for continuity and resistance. If the control board fails these tests, it needs to be replaced.

Evaluating The Pressure Switch

Another common issue with Revolv furnaces is pressure switch failure. The pressure switch is responsible for ensuring that there is enough air flow in the furnace. If the pressure switch fails, the furnace will not turn on. To evaluate the pressure switch, start by checking the air filter. If the air filter is dirty, replace it and try turning the furnace back on. If the furnace still doesn’t turn on, you can test the pressure switch with a multimeter. If the pressure switch fails the test, it needs to be replaced. Other possible causes of a Revolv furnace not working include a faulty igniter, a dirty flame sensor, a malfunctioning gas valve, or a problem with the blower motor. You can troubleshoot these issues by checking for visible damage, cleaning the components, and testing them with a multimeter. If you’re not comfortable troubleshooting your furnace on your own, it’s best to call a professional HVAC technician to diagnose and repair the problem. Remember, regular maintenance of your Revolv furnace can help prevent these common issues from occurring. Change your air filter regularly, keep the furnace clean, and schedule annual maintenance with a professional HVAC technician. By taking these steps, you can keep your furnace running smoothly and avoid costly repairs.

When To Seek Professional Help

When dealing with complex furnace issues, it is crucial to know when to seek professional help. Identifying the signs of more intricate problems and finding qualified HVAC professionals can prevent further damage and ensure a safe and efficient resolution.

Identifying Complex Issues

When troubleshooting your furnace, certain issues may require the expertise of a professional. Complex problems such as control board failures, gas valve malfunctions, or pressure switch issues are best handled by trained HVAC technicians to avoid potential hazards and ensure proper repairs.

Finding Qualified Hvac Professionals

Locating reputable HVAC professionals is essential when facing challenging furnace problems. Conduct thorough research, read reviews, and ask for recommendations to find experienced technicians who can accurately diagnose and repair complex issues, ensuring the longevity and efficiency of your furnace.

Maintenance Tips To Prevent Future Issues

Prevent future issues with Revolv furnace troubleshooting by following maintenance tips. Check igniter, flame sensor, draft inducer motor, control board, flame rollout switch, gas valve, pressure switch regularly. Troubleshoot and reset furnace by checking diagnostic light, fault code, and locating the reset button on the blower motor.

Regular Maintenance Schedule

Implementing a regular maintenance schedule for your furnace is crucial to prevent future issues. Regular maintenance helps identify potential problems early, ensuring optimal performance and efficiency.

Diy Tips For Furnace Longevity

Performing simple DIY maintenance tasks can extend your furnace’s lifespan and reduce the likelihood of breakdowns. Regularly changing filters and keeping vents clear are essential for proper airflow.

Revolv Furnace Troubleshooting: Quick Fixes for Warmth


Frequently Asked Questions

Where Is The Reset Button On My Furnace?

The reset button on your furnace can usually be found on the blower motor, often painted red or yellow for visibility. It pops up about a half-inch when triggered.

Why Is My Furnace Not Responding To The Thermostat?

If your furnace is not responding to the thermostat, check the power source and replace the batteries in the thermostat if needed. Make sure there is power at the furnace as well. If the furnace turns on but doesn’t produce heat, there may be a problem with the fuel supply or ignition system.

Try troubleshooting the furnace’s filter, thermostat, switch, flame, pilot light, and gas valve.

Why Is My Furnace On But Not Heating?

If your furnace is on but not heating, it could be a fuel supply or ignition system issue. Check the gas supply and ignition components for problems. Ensure there is power and no blockages in the system. Regular maintenance can help prevent these issues.

How To Troubleshoot A Furnace Not Starting?

To troubleshoot a furnace not starting, first check the filter, thermostat, switch, electrical panel, flame, pilot light, and gas valve. Make sure the front panel is secure before calling professionals.


Troubleshooting a Revolv furnace can be straightforward with proper guidance. By checking key components like the igniter, flame sensor, and control board, you can identify and resolve issues efficiently. Remember to follow safety protocols and seek professional help if needed for a well-functioning heating system.

Leave a Comment