Are you facing issues with your Ariens snow blower? Follow these troubleshooting steps to fix it fast.
As winter approaches, having a reliable snow blower is essential for keeping your driveway and walkways clear of snow and ice. However, if your Ariens snow blower is not working properly, it can be frustrating and disruptive to your winter routine.
By understanding common troubleshooting techniques, you can quickly diagnose and resolve any issues that may arise with your snow blower. This guide will provide you with helpful tips and solutions to keep your Ariens snow blower running smoothly throughout the winter season.
Contents
Common Issues
If you’re experiencing issues with your Ariens snow blower, common troubleshooting problems may include issues with the spark plug, fuel filter, or carburetor. A clogged fuel line or dirty carburetor can also contribute to starting or running issues. Double-checking these parts and giving them a thorough clean can often fix many common snow blower problems.
Common issues with Ariens snow blowers may include the engine not starting and the auger not turning.
– Check the fuel level to ensure the engine has enough gas.
– Inspect the spark plug for any signs of damage.
– Verify that the choke is in the correct position.
– Clean the carburetor to remove any clogs that may be affecting engine start-up.
– Make sure the auger control lever is engaged properly.
– Inspect the auger belts for any wear or damage.
– Clear any obstructions that may be blocking the auger from rotating.
– Grease the auger bearings to ensure smooth operation.
Engine Does Not Start
Facing issues with your Ariens snow blower because the engine does not start? Let’s dive into some troubleshooting steps to get your snow blower up and running.
Check Fuel Level
Ensure there is enough fuel in the tank to power the snow blower engine properly.
Inspect Spark Plug
Examine the spark plug for signs of wear or damage that may prevent the engine from starting.
Auger Not Turning
When your Ariens snow blower’s auger is not turning, it can be frustrating and may require troubleshooting to get it back in working order. Here are some common steps you can take to address this issue:
Check Drive Belt Tension
Check the drive belt tension to ensure it is properly engaging with the auger drive pulley. Loose or worn-out belts can cause the auger not to turn as intended. Refer to your Ariens snow blower manual for instructions on how to properly adjust the drive belt tension.
Inspect Shear Pins
Inspect the shear pins that secure the auger to the shaft. Broken or sheared shear pins can prevent the auger from turning. Replace any damaged shear pins with genuine Ariens parts to restore proper function to the snow blower’s auger.
Regular maintenance and proper use of your Ariens snow blower can help prevent issues like the auger not turning. If you are unable to resolve the problem on your own, consider seeking assistance from a certified Ariens service technician.
Impeller Not Throwing Snow
In this section, we will discuss troubleshooting tips for when the impeller on your Ariens snow blower is not throwing snow. The impeller is responsible for ejecting the snow that has been collected by the auger, so it is crucial for it to function properly. We will cover two key areas to look at when facing this issue: verifying the impeller blade condition and checking the auger cable tension.
Verify Impeller Blade Condition
Firstly, it is important to inspect the condition of the impeller blades as they could be worn, damaged, or blocked with debris, preventing them from effectively throwing the snow. Follow these steps to analyze the impeller blade condition:
- Ensure the snow blower is turned off and unplugged to avoid any accidents.
- Visually inspect the impeller blades for any signs of wear, cracks, or chips. If you notice any damage, the blades may need to be replaced.
- If the blades appear to be intact, gently clean any debris or ice build-up that may be obstructing the movement of the blades. Use a brush or a soft cloth to remove any dirt or ice.
- Once the impeller blades are clear of any obstructions, test the snow blower to see if the impeller is now throwing the snow efficiently.
Check Auger Cable Tension
Another factor that could result in the impeller not throwing snow properly is the auger cable tension. Follow these steps to check and adjust the cable tension:
- Locate the auger cable adjustment on the snow blower. It is usually located near the handle or control panel.
- Inspect the cable for any signs of fraying or damage. If the cable is damaged, it should be replaced to ensure proper tension.
- If the cable appears to be in good condition, adjust the tension by loosening or tightening the adjustment nut. Refer to your snow blower’s manual for the specific instructions on adjusting the auger cable tension.
- Once the tension is adjusted, test the snow blower to see if the impeller is now throwing snow effectively.
By following these troubleshooting steps, you can identify and address issues with the impeller not throwing snow on your Ariens snow blower. Remember to always refer to your owner’s manual for specific instructions and reach out to a professional if you are unsure or need further assistance.
Uneven Terrain Performance
When it comes to clearing snow on uneven terrain, the Ariens Snow Blower is a reliable choice. However, like any machine, it may encounter some issues along the way. In this section, we will discuss two common troubleshooting steps to ensure optimal performance on uneven surfaces: adjusting the skid shoes and inspecting the differential lock.
Adjust Skid Shoes
The skid shoes of your Ariens Snow Blower play a crucial role in maintaining the proper height and balance of the machine when operating on uneven terrain. These adjustable metal plates are located at the bottom of the auger housing and control the distance between the blower and the ground.
To adjust the skid shoes, follow these simple steps:
- Check the current height of the skid shoes by examining the gap between the bottom edge of the auger housing and the ground. This gap should be consistent and appropriate for the surface you are clearing.
- If the machine is not clearing the snow evenly, you may need to raise or lower the skid shoes accordingly. Refer to the user manual or the manufacturer’s website for specific instructions on adjusting the skid shoes for your model.
- Make sure to adjust the skid shoes equally on both sides to maintain stability and prevent any issues with steering or maneuverability.
Regularly inspecting and adjusting the skid shoes on your Ariens Snow Blower will help you achieve optimal performance on uneven terrain, ensuring a smooth and efficient snow clearing experience.
Inspect Differential Lock
The differential lock is another important component of your Ariens Snow Blower that can impact its performance on uneven terrain. This feature allows both wheels to spin at the same speed, providing maximum traction when navigating through snow and ice.
To inspect the differential lock, follow these steps:
- Locate the differential lock lever on your snow blower’s control panel or near the handlebars.
- Ensure the lever is in the “Engaged” position for maximum traction. If it is in the “Disengaged” position, your snow blower may experience difficulty when operating on uneven surfaces.
- If the lever is already in the “Engaged” position and you are still facing issues with traction, it is recommended to consult the user manual or contact the Ariens customer support team for further assistance.
Regularly inspecting and ensuring the proper engagement of the differential lock on your Ariens Snow Blower will help optimize its performance on uneven terrain, allowing you to tackle even the toughest snow clearing jobs with ease.
Frequently Asked Questions On Ariens Snow Blower Troubleshooting
How Do I Troubleshoot My Ariens Snow Blower?
To troubleshoot your Ariens snow blower, start by checking the spark plug, fuel, and belts for any issues. Clear any obstructions and follow the manufacturer’s manual for troubleshooting steps.
Why Won’t My Ariens Snow Blower Start?
If your Ariens snow blower won’t start, check the fuel level, spark plug, and ignition switch. Ensure the choke is properly adjusted, and the engine is primed. If the problem persists, contact a professional technician.
How Do I Fix A Clogged Fuel Line In My Ariens Snow Blower?
To fix a clogged fuel line in your Ariens snow blower, start by disconnecting the spark plug wire. Remove the fuel line, inspect it for debris, and clean it thoroughly. Reconnect the fuel line and test the snow blower.
What Should I Do If My Ariens Snow Blower Is Not Throwing Snow?
If your Ariens snow blower is not throwing snow, check the impeller blades and auger for any obstructions. Clear any snow or debris from the chute. Ensure the impeller shear pins are intact. If the problem persists, consult a professional.
Why Is My Ariens Snow Blower Engine Running Rough?
If your Ariens snow blower engine is running rough, check the air filter, spark plug, and carburetor for any issues. Clean or replace the air filter, ensure the spark plug is in good condition, and adjust the carburetor if needed.
Conclusion
Troubleshooting your Ariens snow blower can be simple with a little know-how. By following these tips, you can identify and resolve common issues. Regular maintenance and proper usage are key to keeping your snow blower in top condition. Don’t hesitate to seek professional help when needed.
Happy snow blowing!
