To troubleshoot a Whirlpool electric range, reset power to the product by turning on the circuit breaker(s) and starting a bake cycle to verify oven operation. If the oven still doesn’t work, check for loose connections between the burner head and power plug, and inspect the coil for signs of damage or burning.
Replace the coil if necessary. Other common issues that may impact the range’s functionality include faulty control boards or igniters. For a more detailed troubleshooting guide, including error codes and specific solutions, consult the Whirlpool manual or seek assistance from a technician if needed.
Contents
Common Issues With Whirlpool Electric Range
If you own a Whirlpool electric range, you may encounter some common issues that can affect its performance and functionality. This section will discuss the most frequent problems that users face with their Whirlpool electric ranges and provide troubleshooting tips to help you resolve them.
Stove Not Heating Up Properly
If your Whirlpool electric range is not heating up properly, it can be frustrating and hinder your cooking experience. There are several potential reasons why this might be happening:
- Check that the power cord is connected securely to the outlet.
- Verify that the circuit breaker for the range is not tripped or the fuse is not blown.
- Inspect the burner heads for any loose connections or signs of damage.
- Ensure that the coil is clean and doesn’t have any obstructions.
- If the issue persists, it may be a faulty heating element that needs to be replaced. Contact a professional technician to further diagnose and fix the problem.
Burners Not Working
If the burners on your Whirlpool electric range are not working, it can severely hamper your ability to cook. Here are a few troubleshooting steps you can try:
- Check if the burner heads are properly aligned and securely connected to the power plugs.
- Inspect the burner coils for any signs of burning or damage. Replace any damaged coils.
- Verify that the control knobs are set to the appropriate heat setting.
- Ensure that the circuit breaker for the range is not tripped or the fuse is not blown.
- If none of these troubleshooting steps resolve the issue, it could indicate a faulty burner switch or control board. Contact a professional technician for further assistance.
Oven Not Reaching Desired Temperature
If your Whirlpool electric range oven is not reaching the desired temperature, it can affect the cooking time and outcome. Here are a few things you can check out:
- Verify that the oven door is closing properly and that no obstructions are preventing a tight seal.
- Make sure that the temperature is set correctly and hasn’t been accidentally adjusted.
- Check if the oven’s heating element is properly functioning. If it appears damaged or not heating evenly, it may need to be replaced.
- Inspect the oven’s temperature sensor to ensure it’s not loose or faulty.
- Consider recalibrating the oven’s temperature using the manufacturer’s instructions.
The control panel is not functioning.
If the control panel of your Whirlpool electric range is not functioning correctly, it can be troublesome to operate your appliance. Here’s what you can do:
- Check if the control panel is locked. Some Whirlpool electric ranges have a control lock feature that may have been accidentally enabled.
- Verify that the range is receiving power by checking the circuit breaker and ensuring it is not tripped or the fuse is not blown.
- Restart the range by turning off the power for a few minutes and then turning it back on.
- If the control panel remains unresponsive, it may indicate a faulty control board or wiring issue. Contact a professional technician for assistance.
By troubleshooting the common issues mentioned above, you might be able to resolve the problems you’re experiencing with your Whirlpool electric range. However, if the issues persist or require technical expertise, it’s always recommended to consult a professional technician for accurate diagnosis and repair.
Troubleshooting Stove Not Heating Up Properly
Check the Power Source And Connection
If your Whirlpool electric range is not heating up properly, the first thing you should check is the power source and connection. Ensure that the range is plugged in correctly and that the power outlet is functioning properly. Sometimes, a loose or damaged power cord can prevent the stove from heating up. To troubleshoot this, check for any visible damage to the power cord and ensure it is securely connected to the power outlet. If the power source and connection are not the issue, it’s time to move on to the next troubleshooting step.
Ensure The Heating Element Is Not Faulty
The heating element is responsible for generating heat in your Whirlpool electric range. If it is faulty or damaged, the stove may not heat up properly. To check if the heating element is the problem, visually inspect it for any signs of damage or wear. If you notice any cracks or breaks in the element, it will need to be replaced. You can also use a multimeter to test the continuity of the heating element. If there is no continuity, it means the element is faulty and needs to be replaced. Refer to the manufacturer’s manual or contact a professional if you are unsure how to replace the heating element.
Test The Temperature Sensor
The temperature sensor, also known as the oven sensor, measures the temperature inside the oven cavity to ensure it reaches the desired level. If the temperature sensor is not functioning correctly, it can cause the stove to not heat up properly. To test the temperature sensor, you will need a multimeter. Disconnect the sensor wires and use the multimeter to measure the resistance at room temperature. Refer to the manufacturer’s manual for the acceptable resistance range. If the resistance is outside of this range, the temperature sensor is faulty and needs to be replaced.
Check If The Thermostat Is Working Properly
The thermostat controls the temperature of the oven and ensures it stays at the selected setting. If the thermostat is not working properly, it can lead to the stove not heating up properly. To check if the thermostat is functioning correctly, set the oven to a specific temperature and use an oven thermometer to measure if it reaches the desired temperature. If there is a significant difference between the set temperature and the measured temperature, the thermostat may be faulty and needs to be replaced.
Inspect The Control Board For Any Issues
The control board is the main control unit of the Whirlpool electric range and is responsible for regulating various functions, including the oven temperature. If there are any issues with the control board, it can cause the stove to not heat up properly. Visually inspect the control board for any signs of damage, such as burnt or loose connections. Additionally, check if any error codes are displayed on the control panel. If you suspect a problem with the control board, it is recommended to contact a professional technician to diagnose and repair the issue.
Troubleshooting Burners Not Working
One common issue with Whirlpool electric ranges is when the burners stop working. This can be frustrating, especially when you have a meal to prepare. However, there are a few troubleshooting steps you can take to identify and resolve the problem. In this section, we will discuss some of the most common causes of burners not working and the steps you can take to fix them.
Check For Burnt-out Elements
The first thing to check when your Whirlpool electric range burners are not working is the elements. Over time, the heating elements can become burnt out, leading to a loss of functionality. To check for burnt-out elements, you can visually inspect the coils for any signs of damage or breakage. If any of the coils appear damaged or broken, they will need to be replaced. It is important to note that handling heating elements can be dangerous, so if you are unsure or uncomfortable with the process, it is best to seek professional assistance.
Test The Burner Switch
If the heating elements appear to be in good condition, the next step is to test the burner switch. The burner switch is responsible for controlling the flow of electricity to the burners. If the switch is faulty, it may prevent the burners from receiving power. To test the burner switch, you will need a multimeter. Set the multimeter to measure AC voltage and test the switch for continuity. If the switch does not show continuity, it will need to be replaced.
Verify The Voltage Supply To The Burners
Another possible cause of burners not working is a problem with the voltage supply. To verify the voltage supply, you will need to use a multimeter to test the power outlet and wiring. Start by turning off the power to the range and unplugging it from the outlet. Then, use the multimeter to test the outlet for voltage. If there is no voltage, the problem may lie with the wiring or circuit breaker. In this case, it is recommended to contact a professional electrician to inspect and repair the wiring or circuit breaker.
Inspect The Wiring And Connections
If the voltage supply is not the issue, the next step is to inspect the wiring and connections. Over time, the wires or connections can become loose or corroded, which can affect the functionality of the burners. Carefully examine the wiring and connections, looking for any signs of damage or corrosion. If you notice any issues, you may need to replace the wiring or clean and tighten the connections to restore functionality.
Check If The Control Knobs Are Functioning Correctly
Lastly, you should check if the control knobs on your Whirlpool electric range are functioning correctly. Sometimes, the knobs can become loose or worn out, preventing them from properly transferring the settings to the burners. Check each control knob by turning it on and off to ensure that it is engaging the corresponding burner. If any of the knobs are not functioning correctly, they may need to be replaced to restore functionality.
Troubleshooting Oven Not Reaching Desired Temperature
calibrate The Oven Temperature
If your Whirlpool electric range is not reaching the desired temperature, one possible issue could be the oven temperature calibration. Over time, the oven’s temperature sensor or control board may become inaccurate, causing the oven to heat up too much or not enough. To calibrate the oven temperature:
- Preheat the oven to a specific temperature, such as 350°F.
- Use an oven thermometer to check the actual temperature inside the oven.
- If the oven temperature is significantly different from the set temperature, you will need to adjust the calibration. Refer to your appliance’s user manual for specific instructions on how to calibrate the oven temperature.
check The Heating Element For Any Damage
An oven not reaching the desired temperature could indicate a damaged heating element. The heating element is responsible for generating heat in the oven. If it is damaged or burnt out, the oven may struggle to reach the desired temperature. To check the heating element:
- Turn off the oven and unplug it from the power source.
- Locate the heating element at the bottom of the oven.
- Visually inspect the heating element for any signs of damage, such as cracks, bubbles, or discoloration.
- If there are visible signs of damage, you will need to replace the heating element.
test The Oven Sensor
The oven sensor plays a crucial role in regulating the oven’s temperature. If it is faulty or malfunctioning, the oven may not reach the desired temperature. To test the oven sensor:
- Turn off the oven and unplug it from the power source.
- Locate the oven sensor, which is usually located at the back of the oven.
- Use a multimeter to measure the resistance of the oven sensor.
- Compare the measured resistance with the manufacturer’s specifications. If the resistance is significantly different, you will need to replace the oven sensor.
verify That The Control Board Is Working Properly
The control board is responsible for regulating various oven functions, including temperature control. If the control board is faulty or malfunctioning, it may prevent the oven from reaching the desired temperature. To verify the control board’s functionality:
- Turn off the oven and unplug it from the power source.
- Inspect the control board for any visible signs of damage, such as burned marks or loose connections.
- If there are no visible signs of damage, you can perform a control board reset by turning off the oven, unplugging it from the power source for a few minutes, and then plugging it back in.
- If the control board reset does not resolve the issue, you may need to replace the control board.
inspect The Door Seal For Any Gaps
A faulty door seal can cause heat loss in the oven, leading to temperature inconsistencies. To inspect the door seal:
- Turn off the oven and open the door.
- Visually inspect the door seal for any gaps, cracks, or damage.
- If you notice any gaps or damage, you will need to replace the door seal to ensure proper insulation.
Troubleshooting Control Panel Not Functioning
Check The Power Supply To The Control Panel
If you’re experiencing issues with your Whirlpool electric range’s control panel not functioning properly, the first step is to check the power supply. A faulty power supply can often be the culprit behind a malfunctioning control panel. Here’s what you need to do:
- Make sure the range is properly plugged into a functioning power outlet. Check for any loose or disconnected power cords.
- Test the power outlet by plugging in another device to ensure it’s providing power.
- Reset the circuit breaker for the range by turning it off and then on again.
By checking the power supply, you can ensure that the control panel is receiving the necessary power to function properly.
Test The Control Panel Buttons
Another possible cause for a control panel not functioning is faulty buttons. Over time, the buttons on the control panel can become worn out or stuck, resulting in a lack of response. Here’s how to test the control panel buttons:
- Visually inspect the buttons for any physical damage or debris that may be affecting their operation.
- Press each button individually and check for a response. If a button doesn’t produce any result, it may need to be replaced.
- Refer to the user manual or contact Whirlpool customer support for instructions on button replacement.
By testing the control panel buttons, you can determine if they are the cause of the malfunction and take the necessary steps to resolve the issue.
Reset The Control Panel
Resetting the control panel can often resolve minor glitches and restore its functionality. Here’s how to reset the control panel:
- Locate the control panel’s reset button, usually found near the display or on the side of the panel.
- Press and hold the reset button for 10-15 seconds, or as instructed in the user manual.
- Release the reset button and wait for the control panel to reset.
After resetting the control panel, test its functionality to see if the issue has been resolved.
Check For Any Error Codes
If the control panel is displaying error codes, it can provide insight into the underlying issue. Here’s how to check for error codes:
- Refer to the user manual for a list of error codes specific to your Whirlpool electric range model.
- Once you have identified the error code, search online for its meaning and potential solutions.
- Follow the recommended troubleshooting steps for the specific error code to address the issue.
Checking for error codes can help pinpoint the exact problem with the control panel and guide you toward the appropriate solution.
Inspect The Control Board For Any Damage Or Loose Connections
If none of the previous troubleshooting steps have resolved the issue, it’s time to inspect the control board for potential problems. Here’s what you need to do:
- Turn off the power to the range by unplugging it or switching off the circuit breaker.
- Remove the control panel cover to access the control board.
- Visually inspect the control board for any signs of damage, such as burnt components or loose connections.
- If you notice any damage or loose connections, contact a professional technician or Whirlpool customer support for further assistance.
By inspecting the control board, you can identify any underlying issues that may be causing the control panel to malfunction.
Credit: m.youtube.com
Frequently Asked Questions
How Do I Reset My Whirlpool Electric Range?
To reset your Whirlpool electric range, follow these steps: 1. Turn off the circuit breaker(s) to power down the unit. 2. Turn on the circuit breaker(s) to power up the unit again. 3. Start a bake cycle to verify oven operation.
Where Is The Fuse In A Whirlpool Electric Range?
The fuse in a Whirlpool electric range is located either behind the control panel or on the back of the range. Make sure to turn off the power before accessing or replacing the fuse.
Why Is My Whirlpool Electric Oven Not Working?
If your Whirlpool electric oven is not working, check for loose connections between the burner head and power plug. Inspect the coil for any burning or damage, and replace if necessary. Also, reset the power by turning on the circuit breaker(s) and start a bake cycle to verify oven operation.
Why Is My Whirlpool Electric Stove Not Heating Up?
To troubleshoot your Whirlpool electric stove not heating up, check for loose connections between the burner head and power plug. Inspect the coil for any signs of burning or damage and replace if necessary.
Why Is My Whirlpool Electric Range Not Heating Up?
If your Whirlpool electric range is not heating up, it could be due to a faulty heating element or a problem with the control board. Check for any error codes or try resetting the power to see if that resolves the issue.
Conclusion
If you’re experiencing issues with your Whirlpool electric range, don’t worry! Troubleshooting common problems can be simple and effective. By following the tips and techniques outlined in this blog post, you can easily identify and resolve issues with your range.
Whether it’s a faulty control board or a malfunctioning oven igniter, this guide provides you with the necessary knowledge to diagnose and fix the problem. So, instead of panicking or immediately calling a technician, give these troubleshooting methods a try.
You might just save yourself time and money in the process. Happy cooking!
